Water & Sewer Submetering in Cleveland, Ohio
Cleveland's older multi-family housing stock is largely master-metered, and the region's sewer rates are among the fastest-rising in the state. Submetering lets owners recover water and sewer costs based on actual usage instead of absorbing them or passing them through rent.
Single-family vs. multi-family water rates
A key thing to understand before comparing bills: a single-family home and a master-metered multi-family building often pay different rate structures. Utilities frequently apply larger meter-size base charges (or commercial/multi-family rate classes) to apartment buildings, so the "average household" number is a benchmark, not necessarily what a 4- or 8-unit building pays.
Cleveland billing runs through three entities — Cleveland Water (water), Cleveland Water Pollution Control (in-city sewer), and NEORSD (regional sewer). In-city combined water + sewer reached roughly $44 per MCF in 2026 after a 12% sewer increase, and commercial/multi-family accounts pay these volumetric rates across a much larger usage base (1 MCF = 748 gallons).
Rate schedule: Northeast Ohio Regional Sewer District (NEORSD)
Local water & sewer costs
Cleveland bills water through Cleveland Water and sewer through Cleveland WPC + NEORSD; in-city combined water + sewer was roughly $44/MCF in 2026
Source: The Smart Water Valve — Cleveland 2026 sewer rate hike
Cleveland Water Pollution Control raised sewer rates 12% in 2026, and NEORSD has approved a multi-year rate plan — so combined water and sewer costs keep climbing for owners. Source: Cleveland.com — NEORSD approves five-year utility rate plan
For context, combined U.S. water and sewer bills have risen roughly 24% over the last five years, and many metros are tracking or exceeding that pace.
Why rates keep rising
A combined-sewer-overflow (CSO) consent decree and a water/sewer system built in the early-to-mid 1900s are driving sustained, above-average rate increases across Cleveland. Source: NEORSD — CSO consent decree
Local laws & regulations
Submetering is legal in Ohio, and Cleveland landlords may use submetering or RUBS to recover water and sewer costs, provided billing is disclosed fairly. Ohio has regulated RUBS disclosure and lawmakers have proposed further oversight of submetering companies. Confirm current rules with local counsel.
Source: Tenant Rights — Ohio submetering vs. master meter
Market trends
Cleveland has a high renter share and a large inventory of older apartments and duplexes that were built master-metered. Rising sewer costs and aging infrastructure make per-unit cost recovery a recurring owner concern. Cleveland has a high renter share and a large inventory of older, master-metered apartments and duplexes.
Three ways to split the water & sewer bill
Owners of master-metered buildings in Cleveland generally have three options for recovering water and sewer costs:
| Approach | Cost recovery | Fairness | Billing disputes | Conservation |
|---|---|---|---|---|
| Included in rent | Owner absorbs | Low | Hidden | None |
| RUBS (formula) | Partial | Approximate | Higher | Minimal |
| Submetering | Full | Fair | Fewer | ~15.3% less |
A worked cost-recovery example
Suppose a four-unit building receives one master water & sewer bill. Under submetering, that bill is divided by each unit's measured share — a unit using more water pays more, and the owner recovers the full amount without a single rent increase.
Illustrative example — actual shares depend on measured usage.
Conservation & incentives
Submetering isn't just about cost recovery — it drives conservation. The EPA-sponsored National Multiple Family Submetering study found that billing residents for actual usage reduces water consumption by roughly 15.3% on average. Lower usage means a lower master bill for the whole building, which benefits both owners and tenants.
Submetering solutions for Cleveland owners
The SubUtility S1 submeters a whole multi-family building from a single compact device: it monitors up to 16 pipes, installs with push-on sensors in under three minutes per pipe, and delivers billing-grade accuracy at a fraction of the cost of traditional metering. It works with shared plumbing — the exact case where traditional per-unit meters don't fit.
The result is complete cost recovery for owners, a lower cost of living for tenants, and fewer billing disputes — backed by data, not estimates.
Getting started
- 1. Confirm local rules. Check your utility's rate class and current billing rules (and consult counsel if unsure).
- 2. Map the plumbing. Identify the master meter and each unit's branch lines — shared plumbing is fine for submetering.
- 3. Install the meters. Push-on sensors go on in under three minutes per pipe; no plumber required.
- 4. Bill actual usage. Split each master bill by measured usage and recover every dollar.
Frequently asked questions
- Is submetering legal in Cleveland, Ohio?Yes. Submetering and RUBS are both legal in Ohio, with disclosure requirements on how tenant bills are calculated.
- Are Cleveland sewer rates going up?Yes. Cleveland WPC raised sewer rates 12% in 2026, and NEORSD has a multi-year rate plan — combined water and sewer costs keep climbing.
- How do I recover water and sewer costs from tenants?Submeter each unit to bill actual usage, or use RUBS allocation. Submetering is more accurate and typically reduces disputes and consumption.
- Do Cleveland commercial properties pay a different sewer rate?Yes — commercial and multi-family accounts pay the volumetric sewer rate across their full usage, so a larger building sees a larger absolute increase when rates rise.
- Does submetering lower total water use?Yes. The EPA-sponsored submetering study found billing for actual usage cuts consumption by about 15.3% on average.
Local resources
- Cleveland Water
- Northeast Ohio Regional Sewer District (NEORSD)
- Public Utilities Commission of Ohio (PUCO)
Related guides
Glossary
- Master meter
- A single utility meter serving an entire building — the owner receives one combined bill.
- Submeter
- A meter (or ultrasonic sensor) that measures one unit's usage so each tenant is billed for their own share.
- RUBS
- Ratio Utility Billing System — allocates a master bill by a formula (square footage or occupants) rather than actual usage.
- HCF / MCF
- Hundred cubic feet (1 HCF ≈ 748 gallons) and thousand cubic feet (1 MCF ≈ 7,480 gallons) — common water billing units.
Ready to submeter your Cleveland property?
One device. Up to 16 pipes. Installed in minutes.
See the SubUtility S1Local utility rates and laws change over time. The figures and summaries above are for general information only and are not legal advice — confirm current rates and requirements with your utility and a qualified attorney.