Water & Sewer Submetering in Cincinnati, Ohio

Cincinnati's rental market is anchored by a large older multi-family housing stock, much of it master-metered. Submetering lets owners split the water and sewer bill by actual usage instead of absorbing rising rates.

Single-family vs. multi-family water rates

A key thing to understand before comparing bills: a single-family home and a master-metered multi-family building often pay different rate structures. Utilities frequently apply larger meter-size base charges (or commercial/multi-family rate classes) to apartment buildings, so the "average household" number is a benchmark, not necessarily what a 4- or 8-unit building pays.

Cincinnati water is billed by Greater Cincinnati Water Works, and sewer by the Metropolitan Sewer District (MSD). MSD sets its own residential and commercial rates, and larger multi-family accounts follow commercial/meter-size schedules rather than the single-family residential rate.

Rate schedule: Metropolitan Sewer District of Greater Cincinnati (MSD)

Local water & sewer costs

$900 Median annual water & sewer bill (doxoINSIGHTS, 2025)
$75 Approximate monthly

water billed by Greater Cincinnati Water Works; sewer billed by MSD, which publishes separate residential and commercial rate schedules

Source: doxoINSIGHTS — 2025 Water & Sewer Spending Report

MSD continues to raise sewer rates to fund combined-sewer overflow work and aging infrastructure.

For context, combined U.S. water and sewer bills have risen roughly 24% over the last five years, and many metros are tracking or exceeding that pace.

Why rates keep rising

MSD's long-running combined-sewer overflow (CSO) consent decree and wastewater reinvestment keep sewer rates climbing, on top of water rate adjustments.

Local laws & regulations

Submetering is legal in Ohio, and RUBS is permitted with disclosure. Ohio requires clear disclosure of how tenant bills are calculated. Confirm current requirements with local counsel.

Source: Tenant Rights — Ohio RUBS & submetering guide

Cincinnati has a large stock of older master-metered apartments and multi-family homes, and rising sewer costs make per-unit recovery a recurring owner decision. Cincinnati has a large inventory of older, master-metered apartments and multi-family homes.

Three ways to split the water & sewer bill

Owners of master-metered buildings in Cincinnati generally have three options for recovering water and sewer costs:

ApproachCost recoveryFairnessBilling disputesConservation
Included in rent Owner absorbs Low Hidden None
RUBS (formula) Partial Approximate Higher Minimal
Submetering Full Fair Fewer ~15.3% less

A worked cost-recovery example

Suppose a four-unit building receives one master water & sewer bill. Under submetering, that bill is divided by each unit's measured share — a unit using more water pays more, and the owner recovers the full amount without a single rent increase.

Unit A · 35% usage$350of a $1,000 bill
Unit B · 25% usage$250of a $1,000 bill
Unit C · 25% usage$250of a $1,000 bill
Unit D · 15% usage$150of a $1,000 bill

Illustrative example — actual shares depend on measured usage.

Conservation & incentives

Submetering isn't just about cost recovery — it drives conservation. The EPA-sponsored National Multiple Family Submetering study found that billing residents for actual usage reduces water consumption by roughly 15.3% on average. Lower usage means a lower master bill for the whole building, which benefits both owners and tenants.

Submetering solutions for Cincinnati owners

The SubUtility S1 submeters a whole multi-family building from a single compact device: it monitors up to 16 pipes, installs with push-on sensors in under three minutes per pipe, and delivers billing-grade accuracy at a fraction of the cost of traditional metering. It works with shared plumbing — the exact case where traditional per-unit meters don't fit.

The result is complete cost recovery for owners, a lower cost of living for tenants, and fewer billing disputes — backed by data, not estimates.

Getting started

Frequently asked questions

Local resources

Related guides

Glossary

Master meter
A single utility meter serving an entire building — the owner receives one combined bill.
Submeter
A meter (or ultrasonic sensor) that measures one unit's usage so each tenant is billed for their own share.
RUBS
Ratio Utility Billing System — allocates a master bill by a formula (square footage or occupants) rather than actual usage.
HCF / MCF
Hundred cubic feet (1 HCF ≈ 748 gallons) and thousand cubic feet (1 MCF ≈ 7,480 gallons) — common water billing units.

Ready to submeter your Cincinnati property?

One device. Up to 16 pipes. Installed in minutes.

See the SubUtility S1

Local utility rates and laws change over time. The figures and summaries above are for general information only and are not legal advice — confirm current rates and requirements with your utility and a qualified attorney.