Water & Sewer Submetering in St. Paul, Minnesota
St. Paul has a high renter share, a rent-stabilization ordinance, and thousands of master-metered multi-family buildings. Submetering separates water and sewer from rent so owners recover costs without raising regulated rent.
Single-family vs. multi-family water rates
A key thing to understand before comparing bills: a single-family home and a master-metered multi-family building often pay different rate structures. Utilities frequently apply larger meter-size base charges (or commercial/multi-family rate classes) to apartment buildings, so the "average household" number is a benchmark, not necessarily what a 4- or 8-unit building pays.
Saint Paul Regional Water Services bills water and sewer, with residential and commercial/multi-family schedules. Larger master-metered buildings differ from the single-family residential rate.
Rate schedule: Saint Paul Regional Water Services
Local water & sewer costs
water and sewer billed by Saint Paul Regional Water Services, with residential and commercial schedules
Source: Saint Paul Regional Water Services
For context, combined U.S. water and sewer bills have risen roughly 24% over the last five years, and many metros are tracking or exceeding that pace.
Why rates keep rising
Regional sewer infrastructure and water-system reinvestment drive St. Paul's recurring rate increases.
Local laws & regulations
Minnesota statute §216B.022 governs submetering in shared-metered residential buildings, and a 2024 law added renter protections around shared-meter billing. Under St. Paul's rent-stabilization ordinance, separating utilities from rent is a key way to recover costs. Confirm with local counsel.
Source: Minnesota Statutes §216B.022 — Submetering in shared-metered residential buildings
Market trends
St. Paul's rent-stabilization ordinance makes separating water and sewer from rent especially valuable, since utility costs can be billed separately from regulated rent. St. Paul has a high renter share and a rent-stabilization ordinance.
Three ways to split the water & sewer bill
Owners of master-metered buildings in St. Paul generally have three options for recovering water and sewer costs:
| Approach | Cost recovery | Fairness | Billing disputes | Conservation |
|---|---|---|---|---|
| Included in rent | Owner absorbs | Low | Hidden | None |
| RUBS (formula) | Partial | Approximate | Higher | Minimal |
| Submetering | Full | Fair | Fewer | ~15.3% less |
A worked cost-recovery example
Suppose a four-unit building receives one master water & sewer bill. Under submetering, that bill is divided by each unit's measured share — a unit using more water pays more, and the owner recovers the full amount without a single rent increase.
Illustrative example — actual shares depend on measured usage.
Conservation & incentives
Submetering isn't just about cost recovery — it drives conservation. The EPA-sponsored National Multiple Family Submetering study found that billing residents for actual usage reduces water consumption by roughly 15.3% on average. Lower usage means a lower master bill for the whole building, which benefits both owners and tenants.
Submetering solutions for St. Paul owners
The SubUtility S1 submeters a whole multi-family building from a single compact device: it monitors up to 16 pipes, installs with push-on sensors in under three minutes per pipe, and delivers billing-grade accuracy at a fraction of the cost of traditional metering. It works with shared plumbing — the exact case where traditional per-unit meters don't fit.
The result is complete cost recovery for owners, a lower cost of living for tenants, and fewer billing disputes — backed by data, not estimates.
Getting started
- 1. Confirm local rules. Check your utility's rate class and current billing rules (and consult counsel if unsure).
- 2. Map the plumbing. Identify the master meter and each unit's branch lines — shared plumbing is fine for submetering.
- 3. Install the meters. Push-on sensors go on in under three minutes per pipe; no plumber required.
- 4. Bill actual usage. Split each master bill by measured usage and recover every dollar.
Frequently asked questions
- Is submetering legal in St. Paul, Minnesota?Yes. Minnesota statute §216B.022 permits submetering in shared-metered residential buildings, with disclosure and dispute requirements.
- How does rent stabilization affect submetering?Separating water and sewer from rent lets owners recover utility costs without raising regulated rent — a key benefit in a rent-controlled city.
- Who bills water and sewer in St. Paul?Saint Paul Regional Water Services bills water and sewer, with residential and commercial schedules.
- Can I bill tenants for water in a master-metered building?Yes — subject to Minnesota's shared-meter rules. Submetering actual usage is the most defensible approach.
- Does submetering reduce water use?Yes. The EPA-sponsored submetering study found billing for actual usage cuts consumption by about 15.3% on average.
Local resources
Related guides
Glossary
- Master meter
- A single utility meter serving an entire building — the owner receives one combined bill.
- Submeter
- A meter (or ultrasonic sensor) that measures one unit's usage so each tenant is billed for their own share.
- RUBS
- Ratio Utility Billing System — allocates a master bill by a formula (square footage or occupants) rather than actual usage.
- HCF / MCF
- Hundred cubic feet (1 HCF ≈ 748 gallons) and thousand cubic feet (1 MCF ≈ 7,480 gallons) — common water billing units.
Ready to submeter your St. Paul property?
One device. Up to 16 pipes. Installed in minutes.
See the SubUtility S1Local utility rates and laws change over time. The figures and summaries above are for general information only and are not legal advice — confirm current rates and requirements with your utility and a qualified attorney.