Water & Sewer Submetering in Minneapolis, Minnesota
Minneapolis has one of the highest renter shares in the region, and many of its multi-family buildings are master-metered. Minnesota recently updated its shared-meter billing rules, making accurate per-unit submetering more important than ever for landlords.
Single-family vs. multi-family water rates
A key thing to understand before comparing bills: a single-family home and a master-metered multi-family building often pay different rate structures. Utilities frequently apply larger meter-size base charges (or commercial/multi-family rate classes) to apartment buildings, so the "average household" number is a benchmark, not necessarily what a 4- or 8-unit building pays.
Minneapolis bills a fixed monthly service charge by meter size — 2025 was $10.50 water plus $8.80 sewer on a 5/8" meter — plus volumetric water, with sewer billed through the regional Met Council. Multi-family buildings on larger meters pay higher fixed charges.
Rate schedule: City of Minneapolis — Utility rates & fees
Local water & sewer costs
fixed monthly water + sewer service charge (5/8" meter, 2025), before volumetric water usage; sewer is billed through the Met Council
Source: City of Minneapolis — Utility rate history
Fixed water and sewer service charges have climbed each year from 2023 through 2025, and regional sewer rates continue to rise to fund infrastructure.
For context, combined U.S. water and sewer bills have risen roughly 24% over the last five years, and many metros are tracking or exceeding that pace.
Why rates keep rising
Regional sewer infrastructure managed by the Metropolitan Council, plus ongoing water-system reinvestment, drives steady annual increases in both the fixed service charge and volumetric rates.
Local laws & regulations
Minnesota statute §216B.022 governs submetering in shared-metered residential buildings, and a 2024 law gave renters new rights around shared-meter utility billing, including disclosure and dispute requirements. Landlords who bill tenants for utilities should review the current statute and confirm compliance with local counsel.
Source: Minnesota Statutes §216B.022 — Submetering in shared-metered residential buildings
Market trends
Minneapolis is a high-rental-share city with a large stock of older duplexes and apartment buildings — many master-metered. Rising regional water and sewer costs make transparent, per-unit billing a growing priority for owners and a frequent tenant concern. Minneapolis has one of the highest renter shares in the region.
Three ways to split the water & sewer bill
Owners of master-metered buildings in Minneapolis generally have three options for recovering water and sewer costs:
| Approach | Cost recovery | Fairness | Billing disputes | Conservation |
|---|---|---|---|---|
| Included in rent | Owner absorbs | Low | Hidden | None |
| RUBS (formula) | Partial | Approximate | Higher | Minimal |
| Submetering | Full | Fair | Fewer | ~15.3% less |
A worked cost-recovery example
Suppose a four-unit building receives one master water & sewer bill. Under submetering, that bill is divided by each unit's measured share — a unit using more water pays more, and the owner recovers the full amount without a single rent increase.
Illustrative example — actual shares depend on measured usage.
Conservation & incentives
Submetering isn't just about cost recovery — it drives conservation. The EPA-sponsored National Multiple Family Submetering study found that billing residents for actual usage reduces water consumption by roughly 15.3% on average. Lower usage means a lower master bill for the whole building, which benefits both owners and tenants.
Submetering solutions for Minneapolis owners
The SubUtility S1 submeters a whole multi-family building from a single compact device: it monitors up to 16 pipes, installs with push-on sensors in under three minutes per pipe, and delivers billing-grade accuracy at a fraction of the cost of traditional metering. It works with shared plumbing — the exact case where traditional per-unit meters don't fit.
The result is complete cost recovery for owners, a lower cost of living for tenants, and fewer billing disputes — backed by data, not estimates.
Getting started
- 1. Confirm local rules. Check your utility's rate class and current billing rules (and consult counsel if unsure).
- 2. Map the plumbing. Identify the master meter and each unit's branch lines — shared plumbing is fine for submetering.
- 3. Install the meters. Push-on sensors go on in under three minutes per pipe; no plumber required.
- 4. Bill actual usage. Split each master bill by measured usage and recover every dollar.
Frequently asked questions
- Is submetering legal in Minneapolis, Minnesota?Yes. Minnesota law specifically permits submetering in shared-metered residential buildings (Minn. Stat. §216B.022) and requires certain disclosures and dispute procedures.
- How much do water and sewer cost in Minneapolis?A typical household pays a fixed service charge (about $19/month for water + sewer on a 5/8" meter in 2025) plus volumetric usage, with sewer billed through the Met Council.
- Can I bill tenants for water in a master-metered building?Yes, subject to Minnesota's shared-meter billing rules. Submetering bills actual usage, which is more defensible and fairer than allocating by square footage.
- What changed in Minnesota's shared-meter law?A 2024 law added renter protections around shared-meter utility billing — including clearer disclosure and dispute rights — so landlords should review current requirements before billing.
- Does submetering reduce water use?Yes. The EPA-sponsored submetering study found billing for actual usage cuts consumption by about 15.3% on average.
Local resources
- City of Minneapolis — Utility billing
- Metropolitan Council Environmental Services
- Minnesota Public Utilities Commission
Related guides
Glossary
- Master meter
- A single utility meter serving an entire building — the owner receives one combined bill.
- Submeter
- A meter (or ultrasonic sensor) that measures one unit's usage so each tenant is billed for their own share.
- RUBS
- Ratio Utility Billing System — allocates a master bill by a formula (square footage or occupants) rather than actual usage.
- HCF / MCF
- Hundred cubic feet (1 HCF ≈ 748 gallons) and thousand cubic feet (1 MCF ≈ 7,480 gallons) — common water billing units.
Ready to submeter your Minneapolis property?
One device. Up to 16 pipes. Installed in minutes.
See the SubUtility S1Local utility rates and laws change over time. The figures and summaries above are for general information only and are not legal advice — confirm current rates and requirements with your utility and a qualified attorney.