Water & Sewer Submetering in Madison, Wisconsin
Madison has a high renter share driven by the University of Wisconsin and a large stock of duplexes and small apartments, many master-metered. Submetering lets owners bill each unit for actual usage.
Single-family vs. multi-family water rates
A key thing to understand before comparing bills: a single-family home and a master-metered multi-family building often pay different rate structures. Utilities frequently apply larger meter-size base charges (or commercial/multi-family rate classes) to apartment buildings, so the "average household" number is a benchmark, not necessarily what a 4- or 8-unit building pays.
Madison Water Utility bills water with a fixed service charge by meter size plus volumetric usage; sewer is billed through the Madison Metropolitan Sewerage District. Larger multi-family meters carry higher fixed charges.
Rate schedule: Madison Water Utility
Local water & sewer costs
water billed by Madison Water Utility; sewer billed through the Madison Metropolitan Sewerage District
Source: Madison Water Utility
Madison has continued periodic water and sewer rate adjustments to fund infrastructure.
For context, combined U.S. water and sewer bills have risen roughly 24% over the last five years, and many metros are tracking or exceeding that pace.
Why rates keep rising
Regional sewer infrastructure and water-system reinvestment drive Madison's recurring rate adjustments.
Local laws & regulations
Submetering is legal in Wisconsin, subject to disclosure requirements. Confirm current requirements with local counsel.
Source: Tenant Rights — Wisconsin submetering guide
Market trends
Madison's university-anchored rental market keeps demand high, with many master-metered duplexes and apartments. Madison has a high renter share driven by the University of Wisconsin.
Three ways to split the water & sewer bill
Owners of master-metered buildings in Madison generally have three options for recovering water and sewer costs:
| Approach | Cost recovery | Fairness | Billing disputes | Conservation |
|---|---|---|---|---|
| Included in rent | Owner absorbs | Low | Hidden | None |
| RUBS (formula) | Partial | Approximate | Higher | Minimal |
| Submetering | Full | Fair | Fewer | ~15.3% less |
A worked cost-recovery example
Suppose a four-unit building receives one master water & sewer bill. Under submetering, that bill is divided by each unit's measured share — a unit using more water pays more, and the owner recovers the full amount without a single rent increase.
Illustrative example — actual shares depend on measured usage.
Conservation & incentives
Submetering isn't just about cost recovery — it drives conservation. The EPA-sponsored National Multiple Family Submetering study found that billing residents for actual usage reduces water consumption by roughly 15.3% on average. Lower usage means a lower master bill for the whole building, which benefits both owners and tenants.
Submetering solutions for Madison owners
The SubUtility S1 submeters a whole multi-family building from a single compact device: it monitors up to 16 pipes, installs with push-on sensors in under three minutes per pipe, and delivers billing-grade accuracy at a fraction of the cost of traditional metering. It works with shared plumbing — the exact case where traditional per-unit meters don't fit.
The result is complete cost recovery for owners, a lower cost of living for tenants, and fewer billing disputes — backed by data, not estimates.
Getting started
- 1. Confirm local rules. Check your utility's rate class and current billing rules (and consult counsel if unsure).
- 2. Map the plumbing. Identify the master meter and each unit's branch lines — shared plumbing is fine for submetering.
- 3. Install the meters. Push-on sensors go on in under three minutes per pipe; no plumber required.
- 4. Bill actual usage. Split each master bill by measured usage and recover every dollar.
Frequently asked questions
- Is submetering legal in Madison, Wisconsin?Yes. Wisconsin permits submetering and RUBS, with disclosure requirements on how tenant bills are calculated.
- Who bills water and sewer in Madison?Madison Water Utility bills water, and the Madison Metropolitan Sewerage District bills sewer.
- Can I submeter a Madison duplex or apartment?Yes. Submetering each unit bills actual usage and is the fairest, most defensible way to allocate a master bill.
- Do multi-family buildings pay a different rate than houses?Yes — fixed water service charges rise with meter size, so larger multi-family meters cost more than a single-family meter.
- Does submetering reduce water use?Yes. The EPA-sponsored submetering study found billing for actual usage cuts consumption by about 15.3% on average.
Local resources
Related guides
Glossary
- Master meter
- A single utility meter serving an entire building — the owner receives one combined bill.
- Submeter
- A meter (or ultrasonic sensor) that measures one unit's usage so each tenant is billed for their own share.
- RUBS
- Ratio Utility Billing System — allocates a master bill by a formula (square footage or occupants) rather than actual usage.
- HCF / MCF
- Hundred cubic feet (1 HCF ≈ 748 gallons) and thousand cubic feet (1 MCF ≈ 7,480 gallons) — common water billing units.
Ready to submeter your Madison property?
One device. Up to 16 pipes. Installed in minutes.
See the SubUtility S1Local utility rates and laws change over time. The figures and summaries above are for general information only and are not legal advice — confirm current rates and requirements with your utility and a qualified attorney.