Water & Sewer Submetering in St. Louis, Missouri
St. Louis has a large stock of older multi-family and rental housing, much of it master-metered. Submetering lets owners recover water and sewer costs by actual usage instead of a formula.
Single-family vs. multi-family water rates
A key thing to understand before comparing bills: a single-family home and a master-metered multi-family building often pay different rate structures. Utilities frequently apply larger meter-size base charges (or commercial/multi-family rate classes) to apartment buildings, so the "average household" number is a benchmark, not necessarily what a 4- or 8-unit building pays.
St. Louis water is billed by the City Water Division, and sewer by the Metropolitan St. Louis Sewer District (MSD), each with residential and commercial/multi-family schedules. Larger master-metered buildings differ from the single-family residential rate.
Rate schedule: Metropolitan St. Louis Sewer District (MSD)
Local water & sewer costs
water billed by the City Water Division; sewer billed by MSD Project Clear, with residential and commercial schedules
Source: Metropolitan St. Louis Sewer District (MSD)
MSD has continued sewer rate increases to fund consent-decree sewer improvements.
For context, combined U.S. water and sewer bills have risen roughly 24% over the last five years, and many metros are tracking or exceeding that pace.
Why rates keep rising
MSD's long-running sewer overflow consent decree and aging water infrastructure drive St. Louis's recurring rate increases.
Local laws & regulations
Submetering is legal in Missouri, and utility billing statements and disclosures are regulated. Confirm current requirements with local counsel.
Source: Tenant Rights — Missouri utility billing rules
Market trends
St. Louis's older multi-family housing stock and high renter share make per-unit cost recovery a recurring owner concern. St. Louis has a high renter share and a large inventory of older master-metered buildings.
Three ways to split the water & sewer bill
Owners of master-metered buildings in St. Louis generally have three options for recovering water and sewer costs:
| Approach | Cost recovery | Fairness | Billing disputes | Conservation |
|---|---|---|---|---|
| Included in rent | Owner absorbs | Low | Hidden | None |
| RUBS (formula) | Partial | Approximate | Higher | Minimal |
| Submetering | Full | Fair | Fewer | ~15.3% less |
A worked cost-recovery example
Suppose a four-unit building receives one master water & sewer bill. Under submetering, that bill is divided by each unit's measured share — a unit using more water pays more, and the owner recovers the full amount without a single rent increase.
Illustrative example — actual shares depend on measured usage.
Conservation & incentives
Submetering isn't just about cost recovery — it drives conservation. The EPA-sponsored National Multiple Family Submetering study found that billing residents for actual usage reduces water consumption by roughly 15.3% on average. Lower usage means a lower master bill for the whole building, which benefits both owners and tenants.
Submetering solutions for St. Louis owners
The SubUtility S1 submeters a whole multi-family building from a single compact device: it monitors up to 16 pipes, installs with push-on sensors in under three minutes per pipe, and delivers billing-grade accuracy at a fraction of the cost of traditional metering. It works with shared plumbing — the exact case where traditional per-unit meters don't fit.
The result is complete cost recovery for owners, a lower cost of living for tenants, and fewer billing disputes — backed by data, not estimates.
Getting started
- 1. Confirm local rules. Check your utility's rate class and current billing rules (and consult counsel if unsure).
- 2. Map the plumbing. Identify the master meter and each unit's branch lines — shared plumbing is fine for submetering.
- 3. Install the meters. Push-on sensors go on in under three minutes per pipe; no plumber required.
- 4. Bill actual usage. Split each master bill by measured usage and recover every dollar.
Frequently asked questions
- Is submetering legal in St. Louis, Missouri?Yes. Submetering is legal in Missouri, with rules around utility billing statements and disclosures.
- Are St. Louis sewer rates going up?Yes. MSD has continued rate increases to fund consent-decree sewer improvements.
- Can I bill tenants for water in a master-metered building?Yes — submeter each unit for actual usage, or use RUBS. Submetering is the fairest option.
- Do multi-family buildings pay a different rate than houses?Yes — commercial/multi-family schedules differ from the single-family residential rate.
- Does submetering reduce water use?Yes. The EPA-sponsored submetering study found billing for actual usage cuts consumption by about 15.3% on average.
Local resources
- City of St. Louis — Water Division
- Metropolitan St. Louis Sewer District (MSD)
- Missouri Public Service Commission
Related guides
Glossary
- Master meter
- A single utility meter serving an entire building — the owner receives one combined bill.
- Submeter
- A meter (or ultrasonic sensor) that measures one unit's usage so each tenant is billed for their own share.
- RUBS
- Ratio Utility Billing System — allocates a master bill by a formula (square footage or occupants) rather than actual usage.
- HCF / MCF
- Hundred cubic feet (1 HCF ≈ 748 gallons) and thousand cubic feet (1 MCF ≈ 7,480 gallons) — common water billing units.
Ready to submeter your St. Louis property?
One device. Up to 16 pipes. Installed in minutes.
See the SubUtility S1Local utility rates and laws change over time. The figures and summaries above are for general information only and are not legal advice — confirm current rates and requirements with your utility and a qualified attorney.