Water & Sewer Submetering in Detroit, Michigan
Detroit's water and sewer bills are among the highest relative to household income in the Midwest, and the city has a large stock of multi-family housing. For owners of master-metered buildings, submetering is the clearest way to recover costs without looking like the 'bad guy' during rate increases.
Single-family vs. multi-family water rates
A key thing to understand before comparing bills: a single-family home and a master-metered multi-family building often pay different rate structures. Utilities frequently apply larger meter-size base charges (or commercial/multi-family rate classes) to apartment buildings, so the "average household" number is a benchmark, not necessarily what a 4- or 8-unit building pays.
DWSD bills water and sewer together, with a separate drainage/stormwater charge based on impervious area. Single-family and multi-family accounts follow different meter-size schedules, and Detroit's combined bills are among the highest in the region relative to income.
Rate schedule: Detroit Water and Sewerage Department (DWSD)
Local water & sewer costs
annual combined single-family water + sewer for a typical household (120 HCF ≈ 90,000 gal), before drainage/stormwater fees
Source: MWRA Advisory Board — 2025 Water & Sewer Rate Survey
Detroit water and sewer bills are set to rise again, and affordability is a well-documented challenge tied to stormwater cost distribution across the city. Source: The Conversation — Detroit's water affordability crisis
For context, combined U.S. water and sewer bills have risen roughly 24% over the last five years, and many metros are tracking or exceeding that pace.
Why rates keep rising
Lead service line replacement, aging water mains, and an uneven distribution of stormwater costs have made affordability a persistent issue — and bills are set to rise again. Source: The Conversation — Detroit's water affordability crisis
Local laws & regulations
Submetering is legal in Michigan, and landlords may recover water and sewer costs by submetering or RUBS. Requirements can vary by local utility and municipality, so property owners should confirm current rules with local counsel before billing tenants.
Source: Tenant Rights — Michigan utility billing guide
Market trends
Detroit has returned to majority homeownership, but roughly 46% of households still rent, and much of the rental stock is older and master-metered. High water costs make accurate per-unit recovery a priority for small landlords. Roughly 46% of Detroit households rent. Source: Detroit Free Press — Census: 54% of Detroit homes owner-occupied
Three ways to split the water & sewer bill
Owners of master-metered buildings in Detroit generally have three options for recovering water and sewer costs:
| Approach | Cost recovery | Fairness | Billing disputes | Conservation |
|---|---|---|---|---|
| Included in rent | Owner absorbs | Low | Hidden | None |
| RUBS (formula) | Partial | Approximate | Higher | Minimal |
| Submetering | Full | Fair | Fewer | ~15.3% less |
A worked cost-recovery example
Suppose a four-unit building receives one master water & sewer bill. Under submetering, that bill is divided by each unit's measured share — a unit using more water pays more, and the owner recovers the full amount without a single rent increase.
Illustrative example — actual shares depend on measured usage.
Conservation & incentives
Submetering isn't just about cost recovery — it drives conservation. The EPA-sponsored National Multiple Family Submetering study found that billing residents for actual usage reduces water consumption by roughly 15.3% on average. Lower usage means a lower master bill for the whole building, which benefits both owners and tenants.
Submetering solutions for Detroit owners
The SubUtility S1 submeters a whole multi-family building from a single compact device: it monitors up to 16 pipes, installs with push-on sensors in under three minutes per pipe, and delivers billing-grade accuracy at a fraction of the cost of traditional metering. It works with shared plumbing — the exact case where traditional per-unit meters don't fit.
The result is complete cost recovery for owners, a lower cost of living for tenants, and fewer billing disputes — backed by data, not estimates.
Getting started
- 1. Confirm local rules. Check your utility's rate class and current billing rules (and consult counsel if unsure).
- 2. Map the plumbing. Identify the master meter and each unit's branch lines — shared plumbing is fine for submetering.
- 3. Install the meters. Push-on sensors go on in under three minutes per pipe; no plumber required.
- 4. Bill actual usage. Split each master bill by measured usage and recover every dollar.
Frequently asked questions
- Is submetering legal in Detroit, Michigan?Yes. Submetering is legal in Michigan, though local utility and municipal rules can vary, so confirm requirements before billing tenants.
- How much do water and sewer cost in Detroit?A typical single-family household pays about $1,353 per year ($113/month) combined for water and sewer, before drainage fees — with further increases scheduled.
- Why is Detroit water so expensive?Detroit's bills reflect infrastructure replacement, lead service line work, and stormwater costs. Submetering can't lower the master bill, but it fairly allocates it across units.
- Do multi-family buildings pay a different rate?Yes — DWSD uses meter-size schedules, so a larger master-metered building is billed differently than a single-family house.
- Does submetering reduce water use?Yes. The EPA-sponsored submetering study found billing for actual usage cuts consumption by about 15.3% on average.
Local resources
Related guides
Glossary
- Master meter
- A single utility meter serving an entire building — the owner receives one combined bill.
- Submeter
- A meter (or ultrasonic sensor) that measures one unit's usage so each tenant is billed for their own share.
- RUBS
- Ratio Utility Billing System — allocates a master bill by a formula (square footage or occupants) rather than actual usage.
- HCF / MCF
- Hundred cubic feet (1 HCF ≈ 748 gallons) and thousand cubic feet (1 MCF ≈ 7,480 gallons) — common water billing units.
Ready to submeter your Detroit property?
One device. Up to 16 pipes. Installed in minutes.
See the SubUtility S1Local utility rates and laws change over time. The figures and summaries above are for general information only and are not legal advice — confirm current rates and requirements with your utility and a qualified attorney.