Water & Sewer Submetering in Indianapolis, Indiana

Indianapolis has some of the highest combined water and sewer bills among Midwest metros, driven largely by sewer charges. For owners of master-metered apartments and rentals, submetering is the clearest way to recover those costs from the tenants who actually use the water.

Single-family vs. multi-family water rates

A key thing to understand before comparing bills: a single-family home and a master-metered multi-family building often pay different rate structures. Utilities frequently apply larger meter-size base charges (or commercial/multi-family rate classes) to apartment buildings, so the "average household" number is a benchmark, not necessarily what a 4- or 8-unit building pays.

Citizens Energy Group bills water and sewer together; sewer makes up the largest share of the combined bill. Commercial and multi-family accounts use meter-size base charges rather than the single-family schedule.

Rate schedule: Citizens Energy Group — Rates

Local water & sewer costs

$1,686 Typical annual single-family water + sewer bill (120 HCF) Year-over-year: +0.6%
~$141 Approximate monthly

annual combined single-family water + sewer for a typical household (120 HCF ≈ 90,000 gal), before stormwater fees

Source: MWRA Advisory Board — 2025 Water & Sewer Rate Survey

Indianapolis's combined bill is the highest among the six Midwest cities covered on this site, with sewer charges making up the largest share.

For context, combined U.S. water and sewer bills have risen roughly 24% over the last five years, and many metros are tracking or exceeding that pace.

Why rates keep rising

A long-running sewer consent decree and wastewater treatment plant upgrades keep Indianapolis sewer charges among the highest in the Midwest.

Local laws & regulations

Submetering is legal in Indiana, and landlords may recover water and sewer costs by submetering or RUBS, subject to disclosure and billing requirements. Requirements can vary by utility, so confirm current rules with local counsel before billing tenants.

Source: Tenant Rights — Indiana submetering guide

Indianapolis is a fast-growing metro with a large and expanding rental market. Many of its multi-family and rental properties are master-metered, and high sewer costs make per-unit recovery a recurring concern for owners. Indianapolis is a fast-growing metro with an expanding rental market.

Three ways to split the water & sewer bill

Owners of master-metered buildings in Indianapolis generally have three options for recovering water and sewer costs:

ApproachCost recoveryFairnessBilling disputesConservation
Included in rent Owner absorbs Low Hidden None
RUBS (formula) Partial Approximate Higher Minimal
Submetering Full Fair Fewer ~15.3% less

A worked cost-recovery example

Suppose a four-unit building receives one master water & sewer bill. Under submetering, that bill is divided by each unit's measured share — a unit using more water pays more, and the owner recovers the full amount without a single rent increase.

Unit A · 35% usage$350of a $1,000 bill
Unit B · 25% usage$250of a $1,000 bill
Unit C · 25% usage$250of a $1,000 bill
Unit D · 15% usage$150of a $1,000 bill

Illustrative example — actual shares depend on measured usage.

Conservation & incentives

Submetering isn't just about cost recovery — it drives conservation. The EPA-sponsored National Multiple Family Submetering study found that billing residents for actual usage reduces water consumption by roughly 15.3% on average. Lower usage means a lower master bill for the whole building, which benefits both owners and tenants.

Submetering solutions for Indianapolis owners

The SubUtility S1 submeters a whole multi-family building from a single compact device: it monitors up to 16 pipes, installs with push-on sensors in under three minutes per pipe, and delivers billing-grade accuracy at a fraction of the cost of traditional metering. It works with shared plumbing — the exact case where traditional per-unit meters don't fit.

The result is complete cost recovery for owners, a lower cost of living for tenants, and fewer billing disputes — backed by data, not estimates.

Getting started

Frequently asked questions

Local resources

Related guides

Glossary

Master meter
A single utility meter serving an entire building — the owner receives one combined bill.
Submeter
A meter (or ultrasonic sensor) that measures one unit's usage so each tenant is billed for their own share.
RUBS
Ratio Utility Billing System — allocates a master bill by a formula (square footage or occupants) rather than actual usage.
HCF / MCF
Hundred cubic feet (1 HCF ≈ 748 gallons) and thousand cubic feet (1 MCF ≈ 7,480 gallons) — common water billing units.

Ready to submeter your Indianapolis property?

One device. Up to 16 pipes. Installed in minutes.

See the SubUtility S1

Local utility rates and laws change over time. The figures and summaries above are for general information only and are not legal advice — confirm current rates and requirements with your utility and a qualified attorney.