Water & Sewer Submetering in Chicago, Illinois
Chicago has one of the largest rental markets in the Midwest and thousands of older multi-family buildings. Submetering lets owners of master-metered buildings bill each unit for actual usage instead of a formula.
Single-family vs. multi-family water rates
A key thing to understand before comparing bills: a single-family home and a master-metered multi-family building often pay different rate structures. Utilities frequently apply larger meter-size base charges (or commercial/multi-family rate classes) to apartment buildings, so the "average household" number is a benchmark, not necessarily what a 4- or 8-unit building pays.
The City of Chicago bills water and sewer together on a metered schedule, with sewer charges based on water usage. Larger multi-family meters and commercial accounts differ from the single-family residential schedule, so check the meter-size rate that applies to your building.
Rate schedule: City of Chicago — Water & Sewer Rates
Local water & sewer costs
water and sewer billed together by the City of Chicago on a metered schedule; sewer is based on water usage
Source: doxoINSIGHTS — 2025 Water & Sewer Spending Report
Chicago has continued periodic water and sewer rate increases to fund water main replacement and infrastructure.
For context, combined U.S. water and sewer bills have risen roughly 24% over the last five years, and many metros are tracking or exceeding that pace.
Why rates keep rising
Aging water mains, lead service line replacement, and sewer infrastructure reinvestment drive Chicago's recurring rate increases.
Local laws & regulations
Submetering and RUBS are permitted for water billing in Illinois, subject to disclosure rules. Chicago's large rental market also has tenant-protection laws, so confirm current requirements with local counsel.
Source: Tenant Rights — Illinois RUBS utility billing guide
Market trends
Chicago's rental market is among the largest in the country, with a huge stock of older multi-family buildings, many master-metered. Chicago has one of the largest, densest rental markets in the Midwest.
Three ways to split the water & sewer bill
Owners of master-metered buildings in Chicago generally have three options for recovering water and sewer costs:
| Approach | Cost recovery | Fairness | Billing disputes | Conservation |
|---|---|---|---|---|
| Included in rent | Owner absorbs | Low | Hidden | None |
| RUBS (formula) | Partial | Approximate | Higher | Minimal |
| Submetering | Full | Fair | Fewer | ~15.3% less |
A worked cost-recovery example
Suppose a four-unit building receives one master water & sewer bill. Under submetering, that bill is divided by each unit's measured share — a unit using more water pays more, and the owner recovers the full amount without a single rent increase.
Illustrative example — actual shares depend on measured usage.
Conservation & incentives
Submetering isn't just about cost recovery — it drives conservation. The EPA-sponsored National Multiple Family Submetering study found that billing residents for actual usage reduces water consumption by roughly 15.3% on average. Lower usage means a lower master bill for the whole building, which benefits both owners and tenants.
Submetering solutions for Chicago owners
The SubUtility S1 submeters a whole multi-family building from a single compact device: it monitors up to 16 pipes, installs with push-on sensors in under three minutes per pipe, and delivers billing-grade accuracy at a fraction of the cost of traditional metering. It works with shared plumbing — the exact case where traditional per-unit meters don't fit.
The result is complete cost recovery for owners, a lower cost of living for tenants, and fewer billing disputes — backed by data, not estimates.
Getting started
- 1. Confirm local rules. Check your utility's rate class and current billing rules (and consult counsel if unsure).
- 2. Map the plumbing. Identify the master meter and each unit's branch lines — shared plumbing is fine for submetering.
- 3. Install the meters. Push-on sensors go on in under three minutes per pipe; no plumber required.
- 4. Bill actual usage. Split each master bill by measured usage and recover every dollar.
Frequently asked questions
- Is submetering legal in Chicago, Illinois?Yes. Submetering and RUBS are permitted for water billing in Illinois, subject to disclosure rules.
- How does Chicago bill water and sewer?The City bills water and sewer together on a metered schedule, with sewer based on water usage. Larger meters carry different charges.
- Can I bill tenants for water in a Chicago apartment?Yes — submeter each unit for actual usage, or use RUBS. Submetering is the fairest, most defensible approach.
- Do multi-family buildings pay a different rate than houses?Yes — meter size and commercial/multi-family schedules differ from the single-family residential rate.
- Does submetering reduce water use?Yes. The EPA-sponsored submetering study found billing for actual usage cuts consumption by about 15.3% on average.
Local resources
Glossary
- Master meter
- A single utility meter serving an entire building — the owner receives one combined bill.
- Submeter
- A meter (or ultrasonic sensor) that measures one unit's usage so each tenant is billed for their own share.
- RUBS
- Ratio Utility Billing System — allocates a master bill by a formula (square footage or occupants) rather than actual usage.
- HCF / MCF
- Hundred cubic feet (1 HCF ≈ 748 gallons) and thousand cubic feet (1 MCF ≈ 7,480 gallons) — common water billing units.
Ready to submeter your Chicago property?
One device. Up to 16 pipes. Installed in minutes.
See the SubUtility S1Local utility rates and laws change over time. The figures and summaries above are for general information only and are not legal advice — confirm current rates and requirements with your utility and a qualified attorney.