Water & Sewer Submetering in Atlanta, Georgia
Atlanta's large and fast-growing rental market includes thousands of master-metered apartments. Submetering lets owners recover water and sewer costs by actual usage.
Single-family vs. multi-family water rates
A key thing to understand before comparing bills: a single-family home and a master-metered multi-family building often pay different rate structures. Utilities frequently apply larger meter-size base charges (or commercial/multi-family rate classes) to apartment buildings, so the "average household" number is a benchmark, not necessarily what a 4- or 8-unit building pays.
Atlanta's Department of Watershed Management bills water and sewer, with residential and commercial/multi-family schedules. Larger master-metered buildings differ from the single-family residential rate.
Rate schedule: City of Atlanta — Department of Watershed Management
Local water & sewer costs
water and sewer billed by Atlanta's Department of Watershed Management, with residential and commercial schedules
Source: doxoINSIGHTS — 2025 Water & Sewer Spending Report
For context, combined U.S. water and sewer bills have risen roughly 24% over the last five years, and many metros are tracking or exceeding that pace.
Why rates keep rising
Growth and water/sewer infrastructure reinvestment drive Atlanta's recurring rate increases.
Local laws & regulations
Submetering is legal in Georgia; confirm local utility rules and disclosure requirements with local counsel.
Source: HUD — Study of Submetering in HUD-Funded Housing
Market trends
Atlanta's large rental market and master-metered apartment stock make submetering a recurring owner decision. Atlanta has one of the largest rental markets in the Southeast.
Three ways to split the water & sewer bill
Owners of master-metered buildings in Atlanta generally have three options for recovering water and sewer costs:
| Approach | Cost recovery | Fairness | Billing disputes | Conservation |
|---|---|---|---|---|
| Included in rent | Owner absorbs | Low | Hidden | None |
| RUBS (formula) | Partial | Approximate | Higher | Minimal |
| Submetering | Full | Fair | Fewer | ~15.3% less |
A worked cost-recovery example
Suppose a four-unit building receives one master water & sewer bill. Under submetering, that bill is divided by each unit's measured share — a unit using more water pays more, and the owner recovers the full amount without a single rent increase.
Illustrative example — actual shares depend on measured usage.
Conservation & incentives
Submetering isn't just about cost recovery — it drives conservation. The EPA-sponsored National Multiple Family Submetering study found that billing residents for actual usage reduces water consumption by roughly 15.3% on average. Lower usage means a lower master bill for the whole building, which benefits both owners and tenants.
Submetering solutions for Atlanta owners
The SubUtility S1 submeters a whole multi-family building from a single compact device: it monitors up to 16 pipes, installs with push-on sensors in under three minutes per pipe, and delivers billing-grade accuracy at a fraction of the cost of traditional metering. It works with shared plumbing — the exact case where traditional per-unit meters don't fit.
The result is complete cost recovery for owners, a lower cost of living for tenants, and fewer billing disputes — backed by data, not estimates.
Getting started
- 1. Confirm local rules. Check your utility's rate class and current billing rules (and consult counsel if unsure).
- 2. Map the plumbing. Identify the master meter and each unit's branch lines — shared plumbing is fine for submetering.
- 3. Install the meters. Push-on sensors go on in under three minutes per pipe; no plumber required.
- 4. Bill actual usage. Split each master bill by measured usage and recover every dollar.
Frequently asked questions
- Is submetering legal in Atlanta, Georgia?Yes. Submetering is legal in Georgia; confirm local utility rules and disclosure requirements.
- Who bills water and sewer in Atlanta?Atlanta's Department of Watershed Management bills water and sewer, with residential and commercial schedules.
- Can I bill tenants for water in a master-metered building?Yes — submeter each unit for actual usage, or use RUBS. Submetering is the fairest option.
- Do multi-family buildings pay a different rate than houses?Yes — commercial/multi-family schedules differ from the single-family residential rate.
- Does submetering reduce water use?Yes. The EPA-sponsored submetering study found billing for actual usage cuts consumption by about 15.3% on average.
Local resources
Glossary
- Master meter
- A single utility meter serving an entire building — the owner receives one combined bill.
- Submeter
- A meter (or ultrasonic sensor) that measures one unit's usage so each tenant is billed for their own share.
- RUBS
- Ratio Utility Billing System — allocates a master bill by a formula (square footage or occupants) rather than actual usage.
- HCF / MCF
- Hundred cubic feet (1 HCF ≈ 748 gallons) and thousand cubic feet (1 MCF ≈ 7,480 gallons) — common water billing units.
Ready to submeter your Atlanta property?
One device. Up to 16 pipes. Installed in minutes.
See the SubUtility S1Local utility rates and laws change over time. The figures and summaries above are for general information only and are not legal advice — confirm current rates and requirements with your utility and a qualified attorney.