Water & Sewer Submetering in Phoenix, Arizona
Phoenix's explosive multi-family growth and water-scarcity pressures make submetering a powerful tool for both cost recovery and conservation. Owners of master-metered buildings can bill each unit for actual usage.
Single-family vs. multi-family water rates
A key thing to understand before comparing bills: a single-family home and a master-metered multi-family building often pay different rate structures. Utilities frequently apply larger meter-size base charges (or commercial/multi-family rate classes) to apartment buildings, so the "average household" number is a benchmark, not necessarily what a 4- or 8-unit building pays.
Phoenix Water bills water, and the city bills sewer, with residential and commercial/multi-family schedules. Larger master-metered buildings differ from the single-family residential rate.
Rate schedule: City of Phoenix — Water Services
Local water & sewer costs
water billed by the City of Phoenix; sewer billed separately, with residential and commercial schedules
Source: doxoINSIGHTS — 2025 Water & Sewer Spending Report
For context, combined U.S. water and sewer bills have risen roughly 24% over the last five years, and many metros are tracking or exceeding that pace.
Why rates keep rising
Colorado River water-supply constraints, drought, and infrastructure reinvestment drive Phoenix's recurring rate increases.
Local laws & regulations
Arizona statute A.R.S. §33-1314.01 specifically governs utility charges, submetering, and RUBS in rental housing. Confirm current requirements with local counsel.
Source: Arizona Revised Statutes §33-1314.01 — Submetering & RUBS
Market trends
Phoenix's rapid multi-family growth and water-scarcity focus make submetering both a cost-recovery and conservation decision for owners. Phoenix has one of the fastest-growing multi-family markets in the country.
Three ways to split the water & sewer bill
Owners of master-metered buildings in Phoenix generally have three options for recovering water and sewer costs:
| Approach | Cost recovery | Fairness | Billing disputes | Conservation |
|---|---|---|---|---|
| Included in rent | Owner absorbs | Low | Hidden | None |
| RUBS (formula) | Partial | Approximate | Higher | Minimal |
| Submetering | Full | Fair | Fewer | ~15.3% less |
A worked cost-recovery example
Suppose a four-unit building receives one master water & sewer bill. Under submetering, that bill is divided by each unit's measured share — a unit using more water pays more, and the owner recovers the full amount without a single rent increase.
Illustrative example — actual shares depend on measured usage.
Conservation & incentives
Submetering isn't just about cost recovery — it drives conservation. The EPA-sponsored National Multiple Family Submetering study found that billing residents for actual usage reduces water consumption by roughly 15.3% on average. Lower usage means a lower master bill for the whole building, which benefits both owners and tenants.
Submetering solutions for Phoenix owners
The SubUtility S1 submeters a whole multi-family building from a single compact device: it monitors up to 16 pipes, installs with push-on sensors in under three minutes per pipe, and delivers billing-grade accuracy at a fraction of the cost of traditional metering. It works with shared plumbing — the exact case where traditional per-unit meters don't fit.
The result is complete cost recovery for owners, a lower cost of living for tenants, and fewer billing disputes — backed by data, not estimates.
Getting started
- 1. Confirm local rules. Check your utility's rate class and current billing rules (and consult counsel if unsure).
- 2. Map the plumbing. Identify the master meter and each unit's branch lines — shared plumbing is fine for submetering.
- 3. Install the meters. Push-on sensors go on in under three minutes per pipe; no plumber required.
- 4. Bill actual usage. Split each master bill by measured usage and recover every dollar.
Frequently asked questions
- Is submetering legal in Phoenix, Arizona?Yes. Arizona statute A.R.S. §33-1314.01 specifically governs submetering and RUBS in rental housing.
- Who bills water and sewer in Phoenix?The City bills water and sewer, with residential and commercial schedules.
- Can I bill tenants for water in a master-metered building?Yes — submeter each unit for actual usage, or use RUBS. Submetering is the fairest option.
- Do multi-family buildings pay a different rate than houses?Yes — commercial/multi-family schedules differ from the single-family residential rate.
- Does submetering reduce water use?Yes — important in drought-prone Arizona. The EPA-sponsored study found billing for actual usage cuts consumption by about 15.3% on average.
Local resources
Related guides
Glossary
- Master meter
- A single utility meter serving an entire building — the owner receives one combined bill.
- Submeter
- A meter (or ultrasonic sensor) that measures one unit's usage so each tenant is billed for their own share.
- RUBS
- Ratio Utility Billing System — allocates a master bill by a formula (square footage or occupants) rather than actual usage.
- HCF / MCF
- Hundred cubic feet (1 HCF ≈ 748 gallons) and thousand cubic feet (1 MCF ≈ 7,480 gallons) — common water billing units.
Ready to submeter your Phoenix property?
One device. Up to 16 pipes. Installed in minutes.
See the SubUtility S1Local utility rates and laws change over time. The figures and summaries above are for general information only and are not legal advice — confirm current rates and requirements with your utility and a qualified attorney.